3.2. Tuning the hyperparameters of an estimator#
Hyperparameters are parameters that are not directly learnt within estimators.
In scikitlearn they are passed as arguments to the constructor of the
estimator classes. Typical examples include C
, kernel
and gamma
for Support Vector Classifier, alpha
for Lasso, etc.
It is possible and recommended to search the hyperparameter space for the best cross validation score.
Any parameter provided when constructing an estimator may be optimized in this manner. Specifically, to find the names and current values for all parameters for a given estimator, use:
estimator.get_params()
A search consists of:
an estimator (regressor or classifier such as
sklearn.svm.SVC()
);a parameter space;
a method for searching or sampling candidates;
a crossvalidation scheme; and
Two generic approaches to parameter search are provided in
scikitlearn: for given values, GridSearchCV
exhaustively considers
all parameter combinations, while RandomizedSearchCV
can sample a
given number of candidates from a parameter space with a specified
distribution. Both these tools have successive halving counterparts
HalvingGridSearchCV
and HalvingRandomSearchCV
, which can be
much faster at finding a good parameter combination.
After describing these tools we detail best practices applicable to these approaches. Some models allow for specialized, efficient parameter search strategies, outlined in Alternatives to brute force parameter search.
Note that it is common that a small subset of those parameters can have a large impact on the predictive or computation performance of the model while others can be left to their default values. It is recommended to read the docstring of the estimator class to get a finer understanding of their expected behavior, possibly by reading the enclosed reference to the literature.
3.2.1. Exhaustive Grid Search#
The grid search provided by GridSearchCV
exhaustively generates
candidates from a grid of parameter values specified with the param_grid
parameter. For instance, the following param_grid
:
param_grid = [
{'C': [1, 10, 100, 1000], 'kernel': ['linear']},
{'C': [1, 10, 100, 1000], 'gamma': [0.001, 0.0001], 'kernel': ['rbf']},
]
specifies that two grids should be explored: one with a linear kernel and C values in [1, 10, 100, 1000], and the second one with an RBF kernel, and the crossproduct of C values ranging in [1, 10, 100, 1000] and gamma values in [0.001, 0.0001].
The GridSearchCV
instance implements the usual estimator API: when
“fitting” it on a dataset all the possible combinations of parameter values are
evaluated and the best combination is retained.
Examples
See Custom refit strategy of a grid search with crossvalidation for an example of Grid Search computation on the digits dataset.
See Sample pipeline for text feature extraction and evaluation for an example of Grid Search coupling parameters from a text documents feature extractor (ngram count vectorizer and TFIDF transformer) with a classifier (here a linear SVM trained with SGD with either elastic net or L2 penalty) using a
Pipeline
instance.See Nested versus nonnested crossvalidation for an example of Grid Search within a cross validation loop on the iris dataset. This is the best practice for evaluating the performance of a model with grid search.
See Demonstration of multimetric evaluation on cross_val_score and GridSearchCV for an example of
GridSearchCV
being used to evaluate multiple metrics simultaneously.See Balance model complexity and crossvalidated score for an example of using
refit=callable
interface inGridSearchCV
. The example shows how this interface adds certain amount of flexibility in identifying the “best” estimator. This interface can also be used in multiple metrics evaluation.See Statistical comparison of models using grid search for an example of how to do a statistical comparison on the outputs of
GridSearchCV
.
3.2.2. Randomized Parameter Optimization#
While using a grid of parameter settings is currently the most widely used
method for parameter optimization, other search methods have more
favorable properties.
RandomizedSearchCV
implements a randomized search over parameters,
where each setting is sampled from a distribution over possible parameter values.
This has two main benefits over an exhaustive search:
A budget can be chosen independent of the number of parameters and possible values.
Adding parameters that do not influence the performance does not decrease efficiency.
Specifying how parameters should be sampled is done using a dictionary, very
similar to specifying parameters for GridSearchCV
. Additionally,
a computation budget, being the number of sampled candidates or sampling
iterations, is specified using the n_iter
parameter.
For each parameter, either a distribution over possible values or a list of
discrete choices (which will be sampled uniformly) can be specified:
{'C': scipy.stats.expon(scale=100), 'gamma': scipy.stats.expon(scale=.1),
'kernel': ['rbf'], 'class_weight':['balanced', None]}
This example uses the scipy.stats
module, which contains many useful
distributions for sampling parameters, such as expon
, gamma
,
uniform
, loguniform
or randint
.
In principle, any function can be passed that provides a rvs
(random
variate sample) method to sample a value. A call to the rvs
function should
provide independent random samples from possible parameter values on
consecutive calls.
Warning
The distributions in scipy.stats
prior to version scipy 0.16
do not allow specifying a random state. Instead, they use the global
numpy random state, that can be seeded via np.random.seed
or set
using np.random.set_state
. However, beginning scikitlearn 0.18,
the sklearn.model_selection
module sets the random state provided
by the user if scipy >= 0.16 is also available.
For continuous parameters, such as C
above, it is important to specify
a continuous distribution to take full advantage of the randomization. This way,
increasing n_iter
will always lead to a finer search.
A continuous loguniform random variable is the continuous version of
a logspaced parameter. For example to specify the equivalent of C
from above,
loguniform(1, 100)
can be used instead of [1, 10, 100]
.
Mirroring the example above in grid search, we can specify a continuous random
variable that is loguniformly distributed between 1e0
and 1e3
:
from sklearn.utils.fixes import loguniform
{'C': loguniform(1e0, 1e3),
'gamma': loguniform(1e4, 1e3),
'kernel': ['rbf'],
'class_weight':['balanced', None]}
Examples
Comparing randomized search and grid search for hyperparameter estimation compares the usage and efficiency of randomized search and grid search.
References
Bergstra, J. and Bengio, Y., Random search for hyperparameter optimization, The Journal of Machine Learning Research (2012)
3.2.3. Searching for optimal parameters with successive halving#
Scikitlearn also provides the HalvingGridSearchCV
and
HalvingRandomSearchCV
estimators that can be used to
search a parameter space using successive halving [1] [2]. Successive
halving (SH) is like a tournament among candidate parameter combinations.
SH is an iterative selection process where all candidates (the
parameter combinations) are evaluated with a small amount of resources at
the first iteration. Only some of these candidates are selected for the next
iteration, which will be allocated more resources. For parameter tuning, the
resource is typically the number of training samples, but it can also be an
arbitrary numeric parameter such as n_estimators
in a random forest.
Note
The resource increase chosen should be large enough so that a large improvement in scores is obtained when taking into account statistical significance.
As illustrated in the figure below, only a subset of candidates ‘survive’ until the last iteration. These are the candidates that have consistently ranked among the topscoring candidates across all iterations. Each iteration is allocated an increasing amount of resources per candidate, here the number of samples.
We here briefly describe the main parameters, but each parameter and their
interactions are described in more details in the sections below. The
factor
(> 1) parameter controls the rate at which the resources grow, and
the rate at which the number of candidates decreases. In each iteration, the
number of resources per candidate is multiplied by factor
and the number
of candidates is divided by the same factor. Along with resource
and
min_resources
, factor
is the most important parameter to control the
search in our implementation, though a value of 3 usually works well.
factor
effectively controls the number of iterations in
HalvingGridSearchCV
and the number of candidates (by default) and
iterations in HalvingRandomSearchCV
. aggressive_elimination=True
can also be used if the number of available resources is small. More control
is available through tuning the min_resources
parameter.
These estimators are still experimental: their predictions
and their API might change without any deprecation cycle. To use them, you
need to explicitly import enable_halving_search_cv
:
>>> # explicitly require this experimental feature
>>> from sklearn.experimental import enable_halving_search_cv # noqa
>>> # now you can import normally from model_selection
>>> from sklearn.model_selection import HalvingGridSearchCV
>>> from sklearn.model_selection import HalvingRandomSearchCV
Examples
3.2.3.1. Choosing min_resources
and the number of candidates#
Beside factor
, the two main parameters that influence the behaviour of a
successive halving search are the min_resources
parameter, and the
number of candidates (or parameter combinations) that are evaluated.
min_resources
is the amount of resources allocated at the first
iteration for each candidate. The number of candidates is specified directly
in HalvingRandomSearchCV
, and is determined from the param_grid
parameter of HalvingGridSearchCV
.
Consider a case where the resource is the number of samples, and where we
have 1000 samples. In theory, with min_resources=10
and factor=2
, we
are able to run at most 7 iterations with the following number of
samples: [10, 20, 40, 80, 160, 320, 640]
.
But depending on the number of candidates, we might run less than 7
iterations: if we start with a small number of candidates, the last
iteration might use less than 640 samples, which means not using all the
available resources (samples). For example if we start with 5 candidates, we
only need 2 iterations: 5 candidates for the first iteration, then
5 // 2 = 2
candidates at the second iteration, after which we know which
candidate performs the best (so we don’t need a third one). We would only be
using at most 20 samples which is a waste since we have 1000 samples at our
disposal. On the other hand, if we start with a high number of
candidates, we might end up with a lot of candidates at the last iteration,
which may not always be ideal: it means that many candidates will run with
the full resources, basically reducing the procedure to standard search.
In the case of HalvingRandomSearchCV
, the number of candidates is set
by default such that the last iteration uses as much of the available
resources as possible. For HalvingGridSearchCV
, the number of
candidates is determined by the param_grid
parameter. Changing the value of
min_resources
will impact the number of possible iterations, and as a
result will also have an effect on the ideal number of candidates.
Another consideration when choosing min_resources
is whether or not it
is easy to discriminate between good and bad candidates with a small amount
of resources. For example, if you need a lot of samples to distinguish
between good and bad parameters, a high min_resources
is recommended. On
the other hand if the distinction is clear even with a small amount of
samples, then a small min_resources
may be preferable since it would
speed up the computation.
Notice in the example above that the last iteration does not use the maximum
amount of resources available: 1000 samples are available, yet only 640 are
used, at most. By default, both HalvingRandomSearchCV
and
HalvingGridSearchCV
try to use as many resources as possible in the
last iteration, with the constraint that this amount of resources must be a
multiple of both min_resources
and factor
(this constraint will be clear
in the next section). HalvingRandomSearchCV
achieves this by
sampling the right amount of candidates, while HalvingGridSearchCV
achieves this by properly setting min_resources
. Please see
Exhausting the available resources for details.
3.2.3.2. Amount of resource and number of candidates at each iteration#
At any iteration i
, each candidate is allocated a given amount of resources
which we denote n_resources_i
. This quantity is controlled by the
parameters factor
and min_resources
as follows (factor
is strictly
greater than 1):
n_resources_i = factor**i * min_resources,
or equivalently:
n_resources_{i+1} = n_resources_i * factor
where min_resources == n_resources_0
is the amount of resources used at
the first iteration. factor
also defines the proportions of candidates
that will be selected for the next iteration:
n_candidates_i = n_candidates // (factor ** i)
or equivalently:
n_candidates_0 = n_candidates
n_candidates_{i+1} = n_candidates_i // factor
So in the first iteration, we use min_resources
resources
n_candidates
times. In the second iteration, we use min_resources *
factor
resources n_candidates // factor
times. The third again
multiplies the resources per candidate and divides the number of candidates.
This process stops when the maximum amount of resource per candidate is
reached, or when we have identified the best candidate. The best candidate
is identified at the iteration that is evaluating factor
or less candidates
(see just below for an explanation).
Here is an example with min_resources=3
and factor=2
, starting with
70 candidates:



3 (=min_resources) 
70 (=n_candidates) 
3 * 2 = 6 
70 // 2 = 35 
6 * 2 = 12 
35 // 2 = 17 
12 * 2 = 24 
17 // 2 = 8 
24 * 2 = 48 
8 // 2 = 4 
48 * 2 = 96 
4 // 2 = 2 
We can note that:
the process stops at the first iteration which evaluates
factor=2
candidates: the best candidate is the best out of these 2 candidates. It is not necessary to run an additional iteration, since it would only evaluate one candidate (namely the best one, which we have already identified). For this reason, in general, we want the last iteration to run at mostfactor
candidates. If the last iteration evaluates more thanfactor
candidates, then this last iteration reduces to a regular search (as inRandomizedSearchCV
orGridSearchCV
).each
n_resources_i
is a multiple of bothfactor
andmin_resources
(which is confirmed by its definition above).
The amount of resources that is used at each iteration can be found in the
n_resources_
attribute.
3.2.3.3. Choosing a resource#
By default, the resource is defined in terms of number of samples. That is,
each iteration will use an increasing amount of samples to train on. You can
however manually specify a parameter to use as the resource with the
resource
parameter. Here is an example where the resource is defined in
terms of the number of estimators of a random forest:
>>> from sklearn.datasets import make_classification
>>> from sklearn.ensemble import RandomForestClassifier
>>> from sklearn.experimental import enable_halving_search_cv # noqa
>>> from sklearn.model_selection import HalvingGridSearchCV
>>> import pandas as pd
>>>
>>> param_grid = {'max_depth': [3, 5, 10],
... 'min_samples_split': [2, 5, 10]}
>>> base_estimator = RandomForestClassifier(random_state=0)
>>> X, y = make_classification(n_samples=1000, random_state=0)
>>> sh = HalvingGridSearchCV(base_estimator, param_grid, cv=5,
... factor=2, resource='n_estimators',
... max_resources=30).fit(X, y)
>>> sh.best_estimator_
RandomForestClassifier(max_depth=5, n_estimators=24, random_state=0)
Note that it is not possible to budget on a parameter that is part of the parameter grid.
3.2.3.4. Exhausting the available resources#
As mentioned above, the number of resources that is used at each iteration
depends on the min_resources
parameter.
If you have a lot of resources available but start with a low number of
resources, some of them might be wasted (i.e. not used):
>>> from sklearn.datasets import make_classification
>>> from sklearn.svm import SVC
>>> from sklearn.experimental import enable_halving_search_cv # noqa
>>> from sklearn.model_selection import HalvingGridSearchCV
>>> import pandas as pd
>>> param_grid= {'kernel': ('linear', 'rbf'),
... 'C': [1, 10, 100]}
>>> base_estimator = SVC(gamma='scale')
>>> X, y = make_classification(n_samples=1000)
>>> sh = HalvingGridSearchCV(base_estimator, param_grid, cv=5,
... factor=2, min_resources=20).fit(X, y)
>>> sh.n_resources_
[20, 40, 80]
The search process will only use 80 resources at most, while our maximum
amount of available resources is n_samples=1000
. Here, we have
min_resources = r_0 = 20
.
For HalvingGridSearchCV
, by default, the min_resources
parameter
is set to ‘exhaust’. This means that min_resources
is automatically set
such that the last iteration can use as many resources as possible, within
the max_resources
limit:
>>> sh = HalvingGridSearchCV(base_estimator, param_grid, cv=5,
... factor=2, min_resources='exhaust').fit(X, y)
>>> sh.n_resources_
[250, 500, 1000]
min_resources
was here automatically set to 250, which results in the last
iteration using all the resources. The exact value that is used depends on
the number of candidate parameter, on max_resources
and on factor
.
For HalvingRandomSearchCV
, exhausting the resources can be done in 2
ways:
by setting
min_resources='exhaust'
, just like forHalvingGridSearchCV
;by setting
n_candidates='exhaust'
.
Both options are mutually exclusive: using min_resources='exhaust'
requires
knowing the number of candidates, and symmetrically n_candidates='exhaust'
requires knowing min_resources
.
In general, exhausting the total number of resources leads to a better final candidate parameter, and is slightly more timeintensive.
3.2.3.5. Aggressive elimination of candidates#
Ideally, we want the last iteration to evaluate factor
candidates (see
Amount of resource and number of candidates at each iteration). We then just have to
pick the best one. When the number of available resources is small with
respect to the number of candidates, the last iteration may have to evaluate
more than factor
candidates:
>>> from sklearn.datasets import make_classification
>>> from sklearn.svm import SVC
>>> from sklearn.experimental import enable_halving_search_cv # noqa
>>> from sklearn.model_selection import HalvingGridSearchCV
>>> import pandas as pd
>>>
>>>
>>> param_grid = {'kernel': ('linear', 'rbf'),
... 'C': [1, 10, 100]}
>>> base_estimator = SVC(gamma='scale')
>>> X, y = make_classification(n_samples=1000)
>>> sh = HalvingGridSearchCV(base_estimator, param_grid, cv=5,
... factor=2, max_resources=40,
... aggressive_elimination=False).fit(X, y)
>>> sh.n_resources_
[20, 40]
>>> sh.n_candidates_
[6, 3]
Since we cannot use more than max_resources=40
resources, the process
has to stop at the second iteration which evaluates more than factor=2
candidates.
Using the aggressive_elimination
parameter, you can force the search
process to end up with less than factor
candidates at the last
iteration. To do this, the process will eliminate as many candidates as
necessary using min_resources
resources:
>>> sh = HalvingGridSearchCV(base_estimator, param_grid, cv=5,
... factor=2,
... max_resources=40,
... aggressive_elimination=True,
... ).fit(X, y)
>>> sh.n_resources_
[20, 20, 40]
>>> sh.n_candidates_
[6, 3, 2]
Notice that we end with 2 candidates at the last iteration since we have
eliminated enough candidates during the first iterations, using n_resources =
min_resources = 20
.
3.2.3.6. Analyzing results with the cv_results_
attribute#
The cv_results_
attribute contains useful information for analyzing the
results of a search. It can be converted to a pandas dataframe with df =
pd.DataFrame(est.cv_results_)
. The cv_results_
attribute of
HalvingGridSearchCV
and HalvingRandomSearchCV
is similar
to that of GridSearchCV
and RandomizedSearchCV
, with
additional information related to the successive halving process.
Here is an example with some of the columns of a (truncated) dataframe:
iter 
n_resources 
mean_test_score 
params 


0 
0 
125 
0.983667 
{‘criterion’: ‘log_loss’, ‘max_depth’: None, ‘max_features’: 9, ‘min_samples_split’: 5} 
1 
0 
125 
0.983667 
{‘criterion’: ‘gini’, ‘max_depth’: None, ‘max_features’: 8, ‘min_samples_split’: 7} 
2 
0 
125 
0.983667 
{‘criterion’: ‘gini’, ‘max_depth’: None, ‘max_features’: 10, ‘min_samples_split’: 10} 
3 
0 
125 
0.983667 
{‘criterion’: ‘log_loss’, ‘max_depth’: None, ‘max_features’: 6, ‘min_samples_split’: 6} 
… 
… 
… 
… 
… 
15 
2 
500 
0.951958 
{‘criterion’: ‘log_loss’, ‘max_depth’: None, ‘max_features’: 9, ‘min_samples_split’: 10} 
16 
2 
500 
0.947958 
{‘criterion’: ‘gini’, ‘max_depth’: None, ‘max_features’: 10, ‘min_samples_split’: 10} 
17 
2 
500 
0.951958 
{‘criterion’: ‘gini’, ‘max_depth’: None, ‘max_features’: 10, ‘min_samples_split’: 4} 
18 
3 
1000 
0.961009 
{‘criterion’: ‘log_loss’, ‘max_depth’: None, ‘max_features’: 9, ‘min_samples_split’: 10} 
19 
3 
1000 
0.955989 
{‘criterion’: ‘gini’, ‘max_depth’: None, ‘max_features’: 10, ‘min_samples_split’: 4} 
Each row corresponds to a given parameter combination (a candidate) and a given
iteration. The iteration is given by the iter
column. The n_resources
column tells you how many resources were used.
In the example above, the best parameter combination is {'criterion':
'log_loss', 'max_depth': None, 'max_features': 9, 'min_samples_split': 10}
since it has reached the last iteration (3) with the highest score:
0.96.
References
3.2.4. Tips for parameter search#
3.2.4.1. Specifying an objective metric#
By default, parameter search uses the score
function of the estimator
to evaluate a parameter setting. These are the
sklearn.metrics.accuracy_score
for classification and
sklearn.metrics.r2_score
for regression. For some applications,
other scoring functions are better suited (for example in unbalanced
classification, the accuracy score is often uninformative). An alternative
scoring function can be specified via the scoring
parameter of most
parameter search tools. See The scoring parameter: defining model evaluation rules for more details.
3.2.4.2. Specifying multiple metrics for evaluation#
GridSearchCV
and RandomizedSearchCV
allow specifying
multiple metrics for the scoring
parameter.
Multimetric scoring can either be specified as a list of strings of predefined scores names or a dict mapping the scorer name to the scorer function and/or the predefined scorer name(s). See Using multiple metric evaluation for more details.
When specifying multiple metrics, the refit
parameter must be set to the
metric (string) for which the best_params_
will be found and used to build
the best_estimator_
on the whole dataset. If the search should not be
refit, set refit=False
. Leaving refit to the default value None
will
result in an error when using multiple metrics.
See Demonstration of multimetric evaluation on cross_val_score and GridSearchCV for an example usage.
HalvingRandomSearchCV
and HalvingGridSearchCV
do not support
multimetric scoring.
3.2.4.3. Composite estimators and parameter spaces#
GridSearchCV
and RandomizedSearchCV
allow searching over
parameters of composite or nested estimators such as
Pipeline
,
ColumnTransformer
,
VotingClassifier
or
CalibratedClassifierCV
using a dedicated
<estimator>__<parameter>
syntax:
>>> from sklearn.model_selection import GridSearchCV
>>> from sklearn.calibration import CalibratedClassifierCV
>>> from sklearn.ensemble import RandomForestClassifier
>>> from sklearn.datasets import make_moons
>>> X, y = make_moons()
>>> calibrated_forest = CalibratedClassifierCV(
... estimator=RandomForestClassifier(n_estimators=10))
>>> param_grid = {
... 'estimator__max_depth': [2, 4, 6, 8]}
>>> search = GridSearchCV(calibrated_forest, param_grid, cv=5)
>>> search.fit(X, y)
GridSearchCV(cv=5,
estimator=CalibratedClassifierCV(...),
param_grid={'estimator__max_depth': [2, 4, 6, 8]})
Here, <estimator>
is the parameter name of the nested estimator,
in this case estimator
.
If the metaestimator is constructed as a collection of estimators as in
pipeline.Pipeline
, then <estimator>
refers to the name of the estimator,
see Access to nested parameters. In practice, there can be several
levels of nesting:
>>> from sklearn.pipeline import Pipeline
>>> from sklearn.feature_selection import SelectKBest
>>> pipe = Pipeline([
... ('select', SelectKBest()),
... ('model', calibrated_forest)])
>>> param_grid = {
... 'select__k': [1, 2],
... 'model__estimator__max_depth': [2, 4, 6, 8]}
>>> search = GridSearchCV(pipe, param_grid, cv=5).fit(X, y)
Please refer to Pipeline: chaining estimators for performing parameter searches over pipelines.
3.2.4.4. Model selection: development and evaluation#
Model selection by evaluating various parameter settings can be seen as a way to use the labeled data to “train” the parameters of the grid.
When evaluating the resulting model it is important to do it on
heldout samples that were not seen during the grid search process:
it is recommended to split the data into a development set (to
be fed to the GridSearchCV
instance) and an evaluation set
to compute performance metrics.
This can be done by using the train_test_split
utility function.
3.2.4.5. Parallelism#
The parameter search tools evaluate each parameter combination on each data
fold independently. Computations can be run in parallel by using the keyword
n_jobs=1
. See function signature for more details, and also the Glossary
entry for n_jobs.
3.2.4.6. Robustness to failure#
Some parameter settings may result in a failure to fit
one or more folds
of the data. By default, this will cause the entire search to fail, even if
some parameter settings could be fully evaluated. Setting error_score=0
(or =np.nan
) will make the procedure robust to such failure, issuing a
warning and setting the score for that fold to 0 (or nan
), but completing
the search.
3.2.5. Alternatives to brute force parameter search#
3.2.5.1. Model specific crossvalidation#
Some models can fit data for a range of values of some parameter almost as efficiently as fitting the estimator for a single value of the parameter. This feature can be leveraged to perform a more efficient crossvalidation used for model selection of this parameter.
The most common parameter amenable to this strategy is the parameter encoding the strength of the regularizer. In this case we say that we compute the regularization path of the estimator.
Here is the list of such models:

Elastic Net model with iterative fitting along a regularization path. 

Crossvalidated Least Angle Regression model. 

Lasso linear model with iterative fitting along a regularization path. 

Crossvalidated Lasso, using the LARS algorithm. 

Logistic Regression CV (aka logit, MaxEnt) classifier. 

Multitask L1/L2 ElasticNet with builtin crossvalidation. 

Multitask Lasso model trained with L1/L2 mixednorm as regularizer. 
Crossvalidated Orthogonal Matching Pursuit model (OMP). 


Ridge regression with builtin crossvalidation. 

Ridge classifier with builtin crossvalidation. 
3.2.5.2. Information Criterion#
Some models can offer an informationtheoretic closedform formula of the optimal estimate of the regularization parameter by computing a single regularization path (instead of several when using crossvalidation).
Here is the list of models benefiting from the Akaike Information Criterion (AIC) or the Bayesian Information Criterion (BIC) for automated model selection:

Lasso model fit with Lars using BIC or AIC for model selection. 
3.2.5.3. Out of Bag Estimates#
When using ensemble methods base upon bagging, i.e. generating new training sets using sampling with replacement, part of the training set remains unused. For each classifier in the ensemble, a different part of the training set is left out.
This left out portion can be used to estimate the generalization error without having to rely on a separate validation set. This estimate comes “for free” as no additional data is needed and can be used for model selection.
This is currently implemented in the following classes:
A random forest classifier. 

A random forest regressor. 

An extratrees classifier. 


An extratrees regressor. 

Gradient Boosting for classification. 

Gradient Boosting for regression. 